Manufacturer - Epifanes

Apply in thin layers only Mix ratio by weight and volume 100:50 Strong two component finishing filler Very fine and shrink free Provides a smooth surface
Traditional impregnating oil Protects teakwood from discolouration caused by weather or pollutants Ideal for maintenance of teak decks Can be applied wet on wet Ensure w...
Above waterline application only Can be used for interior and exterior applications Provides excellent rust prevention and good hiding properties Easy to sand Recoatable...
Traditional one component primer Good filling, building and covering properties Application above the waterline only Can be recoated with any one component paints
Semi-gloss varnish with teak tint Excellent water resistance UV protection film Emphasizes natural wood grain Bonds well to teak and other oily woods
High gloss base for all types of wood Excellent flow, abrasion resistance, quick drying, superior filling & rapid build up Repaintable wet-on-wet after 2-3 hours at 20...
Cannot be used with Epifanes Mono-Urethane or Epifanes Nautiforte Highly refined oil additive Formulated to extend the wet edge and flowing time Suitable for any Epifanes...
Renews original colour and gloss to all faded gelcoat surfaces Removes severe oxidation, dirt deposits and dullness Produces a fresh looking surface  
Easy to apply, one single application can remove surface oxidation, dirt and water streaks Contains Carnauba Wax Can be applied in full sunshine meaning it is suitable for...
Cleans and maintains all butyl, Hypalon, rubber and vinyl boat surfaces Slows down ageing process considerably, prevents cracking and drying out Removes ingrained dirt, ta...
Easily removes oxidation leaving a clean surface Seapower Poly Boat Wax should be applied after the surface has been cleaned to achieve long lasting protection and prevent...
Ultimate sun block for boats, cars and mobile homes ‘Once a year’ product contains Carnauba Wax Provides maximum protection against weathering and UV exposure...
Water based adhesion primer Excellent bond to aluminium, zinc coated and galvanised steel surfaces, non-ferrous metals, glass & ceramics
Two-component high gloss Resistance to weathering, chemicals, scratching and loss of gloss UV filter protecting wood discolouration Application via brush or spray
Satin Finish Dries quickly for a smooth hard finish Long lasting protection against water, alcohol, abrasion and most on board chemicals
Suitable for embellishment of stone, steel, wood and iron objects The paint can be applied directly on well cleaned and degreased surfaces On aluminium, zinc and well sand...
Long lasting gloss retention Scratch and weather resistant Suitable for spray application only Extremely short overcoating times Outstanding flow properties
Available in Mahogany or Teak Quick drying, impregnating stain Formulated for mahogany or other marine woods A maximum of 3 coats can be applied Recoatable with any one...
Thinner for spray application of one component primers, paints and varnishes Suitable for degreasing wood, existing paint / varnish layers
Thinner for spray application of Poly-Urethane Yacht Coatings Fast evaporating
Can be applied to Epifanes Mono-Urethane or Epifanes Poly-Urethane Paint Add beads to the last two coats of Mono-Urethane or Poly-Urethane Create your own custom colour no...
Thinner for Epifanes PP Varnish Fast evaporating Suitable for degreasing teak wood
Water based coating for teak and other hardwoods Prevents wood from weathering over an extended period of time Fast and easy to apply Does not affect caulking in teak dec...
Water based cleaner for teak and other hardwoods Fast and easy to apply Restores weathered grey looking teak back to its original colour Will not affect the deck caulking...